Creative articles about sewing

A makers Card/Gift to give.


Give a beautiful hand made gift,  a card that becomes a back lit feature stitched by you and given from the heart.







Khadi zig zag book 15cm sq or similar  x 2 ( you can google these or find here or make your self out of 210 g paper).Khadi  zig zag book is paper made form cotton rag and it is moulded into a zig zag form

Fusible web

Metallic foil small amount

Luxury feel fabrics small amounts ( scraps ) I used hand dyed velvet and silk mesh because I liked their texture and lustre on the paper.

Metallic embroidery threads.

Rayon metallic threads.

Satin ribbon to match for tie.

Little bells or other for  card tie.

Sticky sided water soluble fabric.

Pen/pencil marker.

Sewing machine free motion ready.

Closed toe sewing machine foot.

Computerised lettering  program on your sewing machine or free motion stitch words.

Battery operated tee lights.


Baking paper.




I have used 2 sheets of Khadi cotton rag zig zag book 15cm sq. Khadi is a beautiful
white rag paper and comes in packs of five folded zig zag cards in 210gsm, made from 100% long fibred cotton rag. Internally sized with neutral pH size and are acid free.This paper is wonderful to stitch and holds its shape and body.


Cut the fusible web to the same size as your zig zag card and peel the backing off the web.

Lay your peeled  layer of fusible web on top the zig zag card and then lay out your cut and shaped foils and fabrics .I have used hand dyed silk mesh and velvet for their texture and lustre to contrast against the zig zag card.I am sure you will have some treasured bibs and bobs of luxurious fabric that you can use.

When it is all layed out,  carefully place a piece baking paper to cover the entire design and zig zag card, fuse using a dry hot iron.The baking paper protects your iron and surface of art work.



After fusing randomly mark circles which you will cut out in a later step.

Set your machine up for free motion stitching and use a top stitch 70-80 needle use metallic threads and other matching embroidery threads to stitch around the edge and decoratively on your fused shapes .


I use a “drag stitch” to enhance the circular shapes. To do this I do a couple of stitches close together on the outer edge of the circle  and then carefully drag the thread to the middle of the circle where I secure with another couple of stitches and then drag back to the out side of the circle. Continue this until the circle is filled.









When you have completed your free motion stitching to enhance your shapes on the zig zag card, set your machine up for computerised lettering. My machine is a Bernina 720 and I found this youtube link best way for me to learn how to  join letters and words I chose words that were relevant to me and what Christmas means, joy, peace, love, tolerance, happiness etc and I have joined them with some embroidery stitches .I have used a double thread through the one needle for the lettering. A variegated rayon combine with a plain rayon.This helps the lettering to stand out against the back ground design.


When you have completed your lettering glue the second  piece of  of zig zag paper to the back of the stitched piece matching the folds and then cut out your previously marked circles form the double layer.




To prepare the cut out area for stitching place a piece of sticky sided water soluble fabric on both sides of the cut out circle and press the two sides together to adhere.




To fill in the cut out area of the circles I have used a straight stitch and metallic thread.

Outline the outer edge of the circle with several rows of straight stitch in metallic thread.

Stitch a smal circle centrally inside your cut out and then run straight stitches from the outer edge of the cut out circle into the centre of your circle until circle is filled. After it is filled go back into the centre of your cut out circle  and add a few more rows of  straight stitching  to your inner circle. Fill all the cut out areas.

When you have filled all the cut out areas it is time to dissolve the water soluble fabric. I place a wad of paper towelling under the cut out area and use another wad of paper towel which is wet with warm water, dab the cut out area, you may need to do this several times to dissolve the water soluble fabric.You will need to do this from the back and front of zig zag card until it has dissolved. There should be a sticky feeling left in your stitch work to create a stiff feeling when dry. This is hard to judge, but it is not important as long as the gum has disappeared.


To finish the card I stitch the bottom edge with a decorative stitch  and rubbed gold buff on all the edges. Finally attaching a ribbon to tie the card together for postage or storage.Free motion stitch a small circular shape through both layers of the zig zag card and tie a ribbon into the eyelet you have made. I tied the ends of the ribbon with  2 little decorative bells.






Now you have completed your art work which makes a lovely gift, it can be back lit with battery operated tee lights please don’t ever use a naked flame. It would make wonderful present as a card and a decoration you could gift the battery operated teee lights with it .











Enjoy the process and make someone  very special to gift


Some work from my studio this week all made on my bernini 720

Please visit my website





Difficulty level: Intermediate
Time to Complete: Weekend
Used Products:

Link this post Trackback URL

Comments of this post

2 Responses

Leave a Reply

Your email address will not be published.

Required fields are marked *

Dear BERNINA Blog readers,

if you want to publish pictures via the comment function, please log in to the blog first. Click here to sign in.

You haven't registered for the BERNINA blog yet? Click here to create your free account.

Thank you very much

Your BERNINA Blog Team